inside the closets

remember that time we found a hidden "trap door" in the floor? it was actually the access port to the bathroom plumbing.

well, dad -- being the thoughtful and responsible handyman he is -- decided it might be useful to make a removable access panel in the closet floor in case any issues every come up again. what a smart guy! it's tacked down by a few screws, but easy enough to remove if necessary.

meanwhile, dad has also been making progress on the new bathroom closet. our plan is to leave the upper half open shelving, and put a closet door with shelves in the lower half.

think of all the fluffy towels these shelves will be able to hold!

the story of the mysterious puddle

it all started back in september: the puddle.

but where were the drops coming from? after investigating each unit one floor at a time, we made it up to the top floor. BINGO. water leaking under their sink. problem solved.

a few weeks went by with no more puddles (the top floor neighbors had agreed not to use their sink until a plumber came out to fix it). but then...it started again. and this time those tiny splashes of water had turned into constant drops, filling up the buckets underneath. we held an association meeting and decided serious action was needed. plumbers came out to investigate, as well as mold abatement specialists, and it turned out we not only had a leak, but mold as well. bummer.

in the meantime, a tiny hole was cut in my ceiling so the water could drain through and not continue pooling up and billowing out. by now it was a few days before the end of october. about a month and a half of water dripping into my dining room.

then one day i came home to this giant contraption, which i named: the monster.

apparently the leak had been fixed, which meant the mold abatement team could start their magic. they cut a hole in my ceiling, confined the space, and attached a special fan through the only exit so that the mold spores would be captured. ps: that fan was incredibly loud.

but unfortunately in the next few days i noticed water still dripping (and by dripping i mean there was more water pooled up in my dining room than ever before) from outside the monster. see the two buckets i set out? yep. another leak (or two) had sprung.

so the next day the mold abatement crew and the plumber were back. they doubled the size of the hole in my ceiling -- therefore doubling the size of the monster -- which was now taking up the majority of my dining room. you can see the section of plumbing that was repaired, the wood surrounding it was painted over with a special white paint.

fast forward almost another month when the mold was officially proclaimed obsolete, and i finally got to say goodbye to the monster...and hello to a completely useless dining room, taped off in plastic (note: this was not the first time this room has been plastic'ed off).

now it was the carpenter's turn. his task: repair the ceiling.

so far the carpenter's been at my house for six straight days, and i think the end is finally in site.

what's left? once the ceiling is ready, the carpenter will repaint the ceiling. then we'll hire a painter to re-texture the ceiling and then the carpenter will be back to repaint (both the ceiling and part of the teal wall). and then hopefully i'll have my dining room back.

unfortunately i've been told that won't be until quite a while after the turkey day holiday is over...

check your check valves

as most of you know, i have had major plumbing issues for a few years now. and after much research, talking with expert plumbers (even having a few of them at my place), plus snaking my drains more times than i can even remember, we finally figured it out!

dad finally resorted to renting a video camera sewer snake so we could see what was going on down there (i apologize in advance for my lack of technical lingo).

basically, there is this section of pipe called the check valve, there in case the sewer backs up and starts coming back into the pipes. if that ever happens, this backflow valve will stop it from making its way into my place. the valve has two parts, and the back part (a rubber, circular piece) had somehow detached itself from the front piece. long story short, it was too big to get through the rest of the pipe, so it would just sit there, clogging up the drains!

once we figured that out, we had to tear up my floor and try to figure out where exactly that section of pipe was. then it was a simple walk down to ace hardware, buy the new parts, and put it together. i wish we could have figured this out a few years ago! it would have saved a lot of headaches, but better late than never!